View source for Sample ODIS.exe.config File

The following is a sample ODIS-3.exe.config file from ODIS-IC.  <appSettings> parameters may vary from program to program.


 <?xml version="1.0"?>
  <configuration>
   <configSections>
      <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
         <section name="nsOKOS.Applications.ODIS.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" allowExeDefinition="MachineToLocalUser" requirePermission="false"/>
      </sectionGroup>
   </configSections>
   
   <system.diagnostics>
    <trace autoflush="true" indentsize="2">
      <listeners>
        <!-- <clear/> 
        <add name="LogFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="AcqMan.log"/>-->
      </listeners>
    </trace>
    <switches>
      <!-- Set Value to 
            0 for No Logging
            1 for Error Logging
            2 for Warning Logging
            3 for Info Logging
			      4 for Verbose Logging -->
      <add name="ODIS_ScanManager" value="0"/>       
      <add name="AcqMulti81GControl" value="0"/>
      <add name="DaisyChainSwitch" value="0"/>
      <add name="AcqMulti8xGTControl" value="0"/>
      <add name="AcqControllerSwitch" value="0"/>
      <add name="ALNHardware" value="0"/>      
    </switches>
   </system.diagnostics> 
  
   <userSettings>
      <nsOKOS.Applications.ODIS.Properties.Settings>
         <setting name="GoX" serializeAs="String">
            <value>Go Home X</value>
         </setting>
         <setting name="GoY" serializeAs="String">
            <value>Go Home Y</value>
         </setting>
         <setting name="GoZ" serializeAs="String">
            <value>Go Home Z</value>
         </setting>
         <setting name="FileName1" serializeAs="String">
            <value>rainbow.pal.xml</value>
         </setting>
         <setting name="FileName2" serializeAs="String">
            <value>gray.pal.xml</value>
         </setting>
         <setting name="FileName3" serializeAs="String">
            <value>blacktowhite.pal.xml</value>
         </setting>
         <setting name="FileName5" serializeAs="String">
            <value>user1.pal.xml</value>
         </setting>
         <setting name="FileName6" serializeAs="String">
            <value>user2.pal.xml</value>
         </setting>
         <setting name="FileName4" serializeAs="String">
            <value>bscan.pal.xml</value>
         </setting>
         <setting name="FormThresholdCount_Sort" serializeAs="String">
            <value>0</value>
         </setting>
         <setting name="UpgradeRequired" serializeAs="String">
            <value>True</value>
         </setting>
         <setting name="AutoAnalysisSetup_EdgeDetectOn" serializeAs="String">
            <value>True</value>
         </setting>
         <setting name="ScopeDisplay_WaveformInverted" serializeAs="String">
            <value>False</value>
         </setting>
         <setting name="LastParameterFile" serializeAs="String">
            <value />
         </setting>
      </nsOKOS.Applications.ODIS.Properties.Settings>
   </userSettings>
  
  <appSettings>
    <add key="RestoreParameters" value="true"/>
     
    <!-- System Settings -->
    <add key="TokenFile" value="ODIS_IC.xml"/>
    <add key="OperatingUnits" value="mm"/>
    
    <!-- Directory Settings -->
    <add key="Dir_Working" value="C:\ODIS_DATA\Scans"/>
    <add key="Dir_Parameters" value="C:\ODIS_DATA\Parameters"/>
    <add key="Dir_Temp" value="C:\ODIS_DATA\Temp"/>
    <add key="Dir_Palette" value="C:\ODIS_DATA\Palettes"/>
    <add key="Dir_ScanMath" value="C:\ODIS_DATA\ScanMath"/>
    <add key="Dir_Reports" value="C:\ODIS_DATA\Reports"/>
    <add key="Dir_Transducers" value="C:\ODIS_DATA\Transducers"/>
   
    <!-- A/D Settings -->
    <!--If IGNORE is set to true, then the boards will be ordered by how the PCI bus gives them to us but it will not require serial numbers.
        This will work well for 1 board, but if multi boards are present and you want them in the same order every time, you need to set 
        IGNORE to false and list the serial numbers for the board.-->
    <add key="IGNORE" value="true" />
    <add key="HIGHSPEED" value="true" />
    <add key="DisableRTG" value="false" />
    <add key="DisableHW" value="false" />
    <add key="UseShell" value="0" />
    <add key="PostProcessor" value="false" />
    <add key="EncoderResolution" value="2000.0"/>
    <!--<add key="Board0" value="1103883" />
    <add key="Board1" value="1103880" />-->
    
    <!-- P/R Settings -->
    <add key="PRType" value="DPR300"/>
    <!--<add key="MultiType" value="Shell" />
    <add key="NumPulsers" value="2" /> -->
    <add key="PRIPAddress" value="10.90.90.3" />
    <add key="PRIOHW" value="Shell" />
    <add key="PRPort" value="COM1" />

    <!-- Motor Settings -->
    <add key="MotionType" value="Galil"/>
    <add key="DatumOnStart" value="false"/>
    <add key="Init_Motors_With_Limits" value="true"/>
    <add key="Init_Motors_Without_Limits" value="false"/>
    <add key="NumAxes" value="3" />
    <add key="Primary_Encoder_Source_Axis" value=""/>
    <add key="Primary_Encoder_Source_Divisor" value="0"/>
    
    <!-- Scan Settings -->
    <add key="ScanAxis" value="0" />
    <add key="StepAxis" value="1" />
    <add key="FocusAxis" value="2" />
    <add key="ScanTimeout" value="2.0"/>
    
    <!-- Server Settings -->
    <add key="ServerID" value="ODIS"/>
    <add key="ServerIP" value="127.0.0.1"/>
    <add key="ServerPort" value="8800"/>
    <add key="BroadcastIP" value="127.0.0.1"/>

    <!-- Other Settings -->
    <add key="LightPoleIPAddress" value="127.0.0.1"/>
    <add key="CommDevice" value="None"/>
    <add key="CommIPAddress" value="127.0.0.1"/>

    <!-- Diagnostic Settings-->
    <add key="RestartFreeRunning" value="true"/>
    <add key="FireNewData" value="true"/>
    
    <!-- Support Settings -->
    <add key="OKOSUrl" value="http://www.okos.com"/>
    <add key="OKOSWiki" value="http://wiki.okos.com/index.php/ODIS_Manual"/>
    <add key="OKOSSupport" value="support@okos.com"/>
  </appSettings>
  
  <runtime>
    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
    </assemblyBinding>
  </runtime>
  
  <startup>
    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1"/>
  </startup>
  
 </configuration>