Gshotts: /* appSettings */

2024-01-16T20:01:26Z

appSettings

← Older revision		Revision as of 15:01, 16 January 2024
Line 26:		Line 26:
	;ServerID:A User-defined string identifying this instance of ODIS. Can be used to distinguish between ODIS servers if more than one system is present.		;ServerID:A User-defined string identifying this instance of ODIS. Can be used to distinguish between ODIS servers if more than one system is present.
	;BroadcastIP:The IP Address used by the ODIS server to broadcast messages.		;BroadcastIP:The IP Address used by the ODIS server to broadcast messages.
			===FocusPX Settings===
			For software that uses the Olympus FocusPX, the following properties will be present:
			;FocusPxIP:This is the IP Address on which to find FocusPX Devices.
			;FocusPXMaster:This defines the serial number of the Master FocusPX device if more than one are present.
			;FocusPX_Primary_Encoder_Type:The type of encoder input for the Primary encoder.
			;FocusPX_Secondary_Encoder_Type:The type of encoder input for the Secondary encoder.
			;Package:the firmware package to be loaded into the FocusPX.
			;Primary_Encoder_Motor_Axis:Which motor axis position is used for the Primary encoder.
			;Secondary_Encoder_Motor_Axis:Which motor axis position is used for the Secondary encoder.
			;Primary_Encoder_Divisor:divisor for the encoder value output, if different than the encoder resolution in Motors.xml

	===Other Settings===		===Other Settings===
	;RestoreParameters: factory use only		;RestoreParameters: factory use only
	;TokenFile:The name of the token file used to activate ODIS. The name must match the Token file name exactly.		;TokenFile:The name of the token file used to activate ODIS. The name must match the Token file name exactly.

Gshotts: Created page with "''See Also: Sample ODIS.exe.config File'' The .exe.config file is an XML file created along with the ODIS application. The features referenced in the file are usually set once on installation and left in place. However, as the features may require modification, a user can edit some of the features as needed. The file will have the same name as the ODIS program, e.g. if your are running ODIS-IC, there will be an "ODIS-3.exe" and an "ODIS-3.exe.config" file in th..."

2024-01-02T22:14:58Z

Created page with "''See Also: Sample ODIS.exe.config File'' The .exe.config file is an XML file created along with the ODIS application. The features referenced in the file are usually set once on installation and left in place. However, as the features may require modification, a user can edit some of the features as needed. The file will have the same name as the ODIS program, e.g. if your are running ODIS-IC, there will be an "ODIS-3.exe" and an "ODIS-3.exe.config" file in th..."

New page

''See Also: [[Sample ODIS.exe.config File]]''

The .exe.config file is an XML file created along with the ODIS application. The features referenced in the file are usually set once on installation and left in place. However, as the features may require modification, a user can edit some of the features as needed.

The file will have the same name as the ODIS program, e.g. if your are running ODIS-IC, there will be an "ODIS-3.exe" and an "ODIS-3.exe.config" file in the application directory.

== Sections ==

The file has several subsections, only the ''appSettings'' section can be altered by the user.

== appSettings ==

AppSettings, i.e. Application Settings, is used for configuration information and to identify the [[Token File]] to be used to activate the program. The settings are configured as key/value pairs.

the available keys are as follows:

===Pulser Settings===
;PRType:This defines the type of digital Pulser/Receiver in the system.
;PRIPAddress:This defines the IP Address for the DPR, if any.
;PRIOHW:This defines the hardware interface if the DPR uses an I/O device.
;PRPort:This defines the serial port used to communicate with the DPR, if any.

===Server Settings===
;ServerIP:This defines the IP address used when ODIS is configured as a server.
;ServerPort:This defines the port used by ODIS when configured as a server.
;ServerID:A User-defined string identifying this instance of ODIS. Can be used to distinguish between ODIS servers if more than one system is present.
;BroadcastIP:The IP Address used by the ODIS server to broadcast messages.

===Other Settings===
;RestoreParameters: factory use only
;TokenFile:The name of the token file used to activate ODIS. The name must match the Token file name exactly.

EXE Config - Revision history

Gshotts: /* appSettings */