Gate Settings

The Digital Oscillscope has controls for setting up you Gate Tree. There is a Basic Mode (not to be confused with the ODIS Basic Mode and an Advanced Mode for finer control. In Both cases, gates are added to the Gate Tree (shown on the bottom left of the Gate Settings tab.

Basic Mode

Gate Settings (Basic)

The Basic mode consists of the Gate Tree and a set of buttons. To add a gate, press on the specified button. The gate will become a child of whatever gate is selected in the Gate Tree window.

Front Surface Follower, Rising Edge or Falling Edge

Sub-Surface Follower, Rising Edge or Falling Edge

Data Gate

RTG Gate

B-Scan Gate

Before adding a data gate

After adding a data gate

Advanced Mode

Gate Settings (Advanced)

By clicking on the "Show Advanced" button, the user will see the Advanced gate settings. This allows for more gate options and better control over gate positioning. To add a gate, right-click on the Gate Tree and select "Add Gate". A dialog box will appear letting the user specify the gate type and settings.

The gate will become the child of whichever gate was originally clicked.

Add Gate Menu on the Gate Tree

Dialog when adding a gate. The user can specify the type, name, color and other features.

Dialog when adding a SALI Gate.

For more information on the gate types, see Gates.