All public logs

Combined display of all available logs of OKOS Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

15:02, 16 January 2024 Gshotts talk contribs uploaded File:InstrumentsBasic.png
15:02, 16 January 2024 Gshotts talk contribs created page Gain Adjustment (Created page with "Adjusting the gain is one of the most common tasks when shaping the ultrasonic waveform. By increasing the gain, low-amplitude features can be made visible that would otherwise be lost in the signal. Conversely, and increase in gain will also increase any noise present. Using the right combination of transducers, pulser, A/D input range, and focus is critical to generate a proper signal with minimal noise. ==Gain Adjustment using the Glossary of Terms#A/D|A/...")
14:50, 16 January 2024 Gshotts talk contribs created page Sample ODIS.exe.config File (Created page with "The following is a sample ODIS-3.exe.config file from <?xml version="1.0"?> <configuration> <configSections> <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <section name="nsOKOS.Applications.ODIS.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" al...")
14:20, 16 January 2024 Gshotts talk contribs created page Sample Motors.xml File (Created page with "This example shows the definition for an 8-Axis Galil Motor Controller with no Motor Triggering defined and no Axis Map defined. <?xml version="1.0" encoding="utf-8" ?>  <MultiBoard> <Board type="DMC1880" value="0">  <LimitPolarity>NC</LimitPolarity> <!-- Axis used to slave to current scan axis --...")
14:16, 16 January 2024 Gshotts talk contribs created page File:AxisMapping.png
14:16, 16 January 2024 Gshotts talk contribs uploaded File:AxisMapping.png
14:15, 16 January 2024 Gshotts talk contribs created page File:RotatorDiameter.png
14:15, 16 January 2024 Gshotts talk contribs uploaded File:RotatorDiameter.png
14:11, 16 January 2024 Gshotts talk contribs created page Motors.xml (Created page with "''See Also: Sample Motors.xml File'' The Motors.xml file is used to define the motor axes used in the system. It is written to be a layer of abstraction above the motor controller itself, so that multiple motor controllers can be defined and used in a system. As of this writing, the file is located in the same directory as the ODIS application. Depending on where ODIS was installed, you may need Administrative privileges to edit the file. ==Format==...")
14:11, 16 January 2024 Gshotts talk contribs created page File:GalilMotorTriggeringConnectionsStepper.png
14:11, 16 January 2024 Gshotts talk contribs uploaded File:GalilMotorTriggeringConnectionsStepper.png
14:10, 16 January 2024 Gshotts talk contribs created page File:GalilMotorTriggeringConnectionsServoWithPositionLatch.png
14:10, 16 January 2024 Gshotts talk contribs uploaded File:GalilMotorTriggeringConnectionsServoWithPositionLatch.png
14:09, 16 January 2024 Gshotts talk contribs created page File:GalilMotorTriggeringConnectionsServo.png
14:09, 16 January 2024 Gshotts talk contribs uploaded File:GalilMotorTriggeringConnectionsServo.png
14:09, 16 January 2024 Gshotts talk contribs created page Motor Trigger Connections (Created page with "''See Also:Triggering'' Motor Triggering is a pulse-on position process of using the Motor hardware to send triggers to the A/D board(s), rather than letting the A/D board do pulse-on-position via Encoder counts. This method can allow a system to collect data if encoder feedback is not available to the A/D board(s), but must be configured carefully. '''''Note:''' this document deals with Motor triggering as done using the [http://w...")
14:07, 16 January 2024 Gshotts talk contribs created page File:TriggerModeAdvancedSM.png
14:07, 16 January 2024 Gshotts talk contribs uploaded File:TriggerModeAdvancedSM.png
14:06, 16 January 2024 Gshotts talk contribs created page Glossary of Terms (Created page with "==A== ;A-Scan:A single waveform of data as displayed on a Digital Oscilloscope. ;A/D:'''A'''nalog to '''D'''igital. Refers to the process of sampling analog data and converting it into digital format, e.g. when an A/D board (Digtizer) converts an analog waveform into digital information. ;Amplitude: The height of data displayed on a Waveform. See Peak Amplitude. ;APA:Absolute Peak Amplitude ==B== ;B-Scan:an image consisting of a set of...")
14:05, 16 January 2024 Gshotts talk contribs created page File:EncoderTriggeringConnections.png
14:05, 16 January 2024 Gshotts talk contribs uploaded File:EncoderTriggeringConnections.png
14:05, 16 January 2024 Gshotts talk contribs created page File:MotorTriggeringConnections.png
14:05, 16 January 2024 Gshotts talk contribs uploaded File:MotorTriggeringConnections.png
14:04, 16 January 2024 Gshotts talk contribs created page File:TriggerModeAdvanced.png
14:04, 16 January 2024 Gshotts talk contribs uploaded File:TriggerModeAdvanced.png
14:03, 16 January 2024 Gshotts talk contribs created page File:PulseOnPositionMotor.png
14:03, 16 January 2024 Gshotts talk contribs uploaded File:PulseOnPositionMotor.png
14:03, 16 January 2024 Gshotts talk contribs created page File:PulseOnPosition.png
14:03, 16 January 2024 Gshotts talk contribs uploaded File:PulseOnPosition.png
14:02, 16 January 2024 Gshotts talk contribs created page Triggering (Created page with "Triggering tells the P/R when to fire and the A/D board when to collect a result. Triggers may be generated by the A/D board, the P/R, the Motor controller, an external signal, or a combination of all three. Many different triggering modes are available, depending on the user requirements. ==Common Triggering Modes== ===Auto-Software=== <table align="left" border="1" cellspacing="0" cellpadding="3" style="margin:5...")
14:01, 16 January 2024 Gshotts talk contribs created page File:EncoderTriggeringConnectionTwoChannel.png
14:01, 16 January 2024 Gshotts talk contribs uploaded File:EncoderTriggeringConnectionTwoChannel.png
14:00, 16 January 2024 Gshotts talk contribs created page File:ThresholdTriggeringConnections.png
14:00, 16 January 2024 Gshotts talk contribs uploaded File:ThresholdTriggeringConnections.png
14:00, 16 January 2024 Gshotts talk contribs created page File:BNCTriggeringConnections.png
14:00, 16 January 2024 Gshotts talk contribs uploaded File:BNCTriggeringConnections.png
13:59, 16 January 2024 Gshotts talk contribs created page A/D and P/R Connections (Created page with "Most ODIS supported A/D boards have a trigger I/O port and one or more signal inputs. Similarly, most Pulser/Recievers have one or more Trigger I/O connections, one or more signal outputs, and Pulse/Echo or Through Transmission connections to the ultrasonic transducer. ==Single-Channel System Examples== '''''Note:''' The configurations below use a P/R in Pulse-Echo mode.'' <table align="center"> <tr valign="top"> <td> File:BNCTriggeri...")
13:58, 16 January 2024 Gshotts talk contribs created page How-To Guides (Created page with "This section contains links that describe the basic configuration needed for common tasks. ==Connecting and Calibrating your System== ;To connect the A/D and P/R: See A/D and P/R Connections. ;To set up Encoder Triggering: See Triggering. ;To Set up Motor Triggering: See Motor Trigger Connections. ;For other configurations: See Making Connections. ==Pre-Processing== ;To setup Gain: S...")
16:50, 3 January 2024 Gshotts talk contribs created page File:ChannelMapping2BoardResult.png
16:50, 3 January 2024 Gshotts talk contribs uploaded File:ChannelMapping2BoardResult.png
16:25, 3 January 2024 Gshotts talk contribs created page File:EncoderFeedback.png
16:25, 3 January 2024 Gshotts talk contribs uploaded File:EncoderFeedback.png
16:25, 3 January 2024 Gshotts talk contribs created page File:PositionDirections.png
16:25, 3 January 2024 Gshotts talk contribs uploaded File:PositionDirections.png
16:25, 3 January 2024 Gshotts talk contribs created page File:AxisMotion.png
16:25, 3 January 2024 Gshotts talk contribs uploaded File:AxisMotion.png
16:24, 3 January 2024 Gshotts talk contribs created page File:RangeResults.png
16:24, 3 January 2024 Gshotts talk contribs uploaded File:RangeResults.png
16:24, 3 January 2024 Gshotts talk contribs created page File:ScanRangeWarning.png
16:24, 3 January 2024 Gshotts talk contribs uploaded File:ScanRangeWarning.png

All public logs

Navigation menu

Search